+2711 680 5670/1 Cell 076 905 1467 sales@ccimelmann.co.za
Select Page

CCI-Blue Logo

PORTAVO 908 MULTI

Portavo 908 Multi enables versatile and flexible use. When combined with digital Memosens sensors, the following measurement parameters are supported:

  • pH
  • Redox
  • Conductive conductivity
  • Inductive conductivity
  • Amperometric oxygen
  • Optical oxygen
  • Temperature

A printer for immediate printing of  the calibration record (GLP compliant) can be directly connected to the  micro USB port.

Many new features distinguish the Portavo 908 Multi for use in the pharmaceutical and biotech field. These include

  • a new pH calibration procedure with a fixed process cycle
  • multi-level user management with access control
  • direct assignment of Memosens sensors to the device, which increases safety in operation.

PH SENSORS DIGITAL

CODE DESCRIPTION
SE 101 NMS PLASTIC BODY, 120mm, RANGE 0 -14, WITH PT1000 TEMP SENSOR 0-80°C
SE 102 NMS GLASS BODY, 110mm, RANGE 0 -14, WITH PT1000 TEMP SENSOR 0-80°C
CA/MS-001XFA-L Measuring cable for digital sensors with Memosens connector 

CONDUCTIVITY SENSORS DIGITAL

CODE DESCRIPTION
SE 615/1-MS 2-electrode sensor with polymer body
CA/MS-001XFA-L Measuring cable for digital sensors with Memosens connector 

OXYGEN SENSORS DIGITAL

CODE DESCRIPTION
SE 715/1-MS Oxygen sensor with Memosens connector
SE 340 Optical oxygen sensor with fixed cable (Portavo 907 MULTI OXY only)
CA/MS-001XFA-L Measuring cable for digital sensors with Memosens connector 

ACCESSORIES

CODE DESCRIPTION
CA/M12-001M8-L Measuring cable for digital toroidal conductivity sensors with Memosens protocol
ZU 0925 Li-ion battery (USB chargeable, for Portavo 904, 907 and 908 only)
   
Order No. Printer (for Portavo 908 Multi only)
ZU 1000 EPSON TM-U220B impact receipt printer
ZU 1001 Ink ribbon for EPSON TM-U220B
ZU 1002 Receipt rolls for EPSON TM-U220B, 70 mm x 80 m (WxL)
   
Order No. TAN Options (Portavo 904, 907 Multi, 908 Multi only)
SW-P001 Cal SOP calibration method: user management, sensor verification, temperature adjustment (offset)
SW-P002 Temperature adjustment (offset)

SE 101-MS PH SENSOR DIGITAL

probe se-101-nms-1-xx

The new digital sensor with Memosens technology stores calibration data and diagnostics data directly in the sensor head. Immediately after being plugged into the measuring device, it provides precise measuring results.

The contactless inductive transmission of energy and data enables trouble-free and reliable outdoor measurements – without being affected by rain or dirt.

FACTS

  • pH sensor with temperature detector
  • Memosens technology
  • pH range: 0 … 12
  • Temperature range: -5 … +80 °C
  • Electrolyte: polymer
  • Junction: 2 x ceramic
  • Plastic body: epoxy
  • Body length: 110 mm
  • Body diameter: 12 mm

SE 102-MS PH SENSOR DIGITAL

PROBE SE102 NMS

The new digital sensor with Memosens technology stores calibration data and diagnostics data directly in the sensor head. Immediately after being plugged into the measuring device, it provides precise measuring results.

The contactless inductive transmission of energy and data enables trouble-free and reliable outdoor measurements – without being affected by rain or dirt.

FACTS

  • pH sensor with temperature detector
  • Memosens technology
  • pH range: 0 … 12
  • Temperature range: -5 … +100 °C
  • Electrolyte: liquid, refillable
  • Junction: ceramic
  • Body length: 110 mm
  • Body diameter: 12 mm

SE 615 N CONDUCTIVITY SENSOR DIGITAL

PROBE SE615

Large measuring range thanks to electrodes made from low polarized special graphite. Designed for MemoRail applications.
The SE 615 conductivity sensor with Memosens connector system has 2 graphite electrodes and requires low maintenance.

The integrated temperature detector provides automatic temperature compensation during calibration and operation of the sensor. The sensor is designed for simultaneous measurement of conductivity and temperature in industrial processes.

FACTS

  • Perfect galvanic isolation thanks to Memosens technology
  • No influence of humidity in the connector
  • Precalibration in the lab
  • Digital data transfer
  • Integrated sensor diagnostics
  • low maintenance
  • Integrated temperature detector
  • 2 graphite electrodes 

Applications
Water/wastewater treatment.

SE 715 OXYGEN SENSOR DIGITAL

PROBE SE715

The SE 715 oxygen sensor with Memosens connector system requires low maintenance and is equipped with a temperature detector. It is characterized by its high long-term stability, fast response and low flow dependence. The sensor is designed for simultaneous measurement of dissolved oxygen and temperature in industrial processes.

FACTS

  • perfect galvanic isolation thanks to Memosens technology
  • no influence of humidity in the connector
  • precalibration in the lab
  • digital data transfer
  • integrated sensor diagnostics
  • high level of process safety
  • low maintenance
  • high long-term stability
  • quick response behaviour
  • low flow dependance

Applications
Water, wastewater, aeration, ventilation control, fish farming, aquariums